MetaMask fees: 0.875 percent per swap, while gas on Ethereum costs less than one euro
MetaMask charges 0.875 percent on swaps and bridges, and gas goes to the network on top of that. Our own analysis of 19 swaps shows when the percentage and when the gas dominates the bill.

Table of Contents
Table of Contents
Which topics should we dive deeper into?
Select what genuinely interests you. Your picks feed directly into our editorial planning.
Crypto news that's actually worth your time.
Weekly. 60 seconds. Carefully curated by our editors: no hype, no promo flood, no spam.
MetaMask fees come in two parts. For swaps, bridges, limit orders and quick buying or selling, MetaMask itself charges a service fee of 0.875 percent, and on top of that comes the gas, which goes to the respective network. Simply holding, receiving and sending coins costs nothing in the wallet beyond the gas. On a swap worth €1,000, that means €8.75 to MetaMask, while the gas for a swap on Ethereum mostly stayed below one euro on Sunday evening, November 15.
MetaMask is the best-known software wallet for Ethereum and compatible networks, available as a browser extension for Chrome, Firefox, Brave and Edge and as a mobile app. A software wallet is a program that manages your private keys on your own device; it gives you self-custody, without an exchange holding your balance. If you only want to know how to set up the wallet, our guide set up MetaMask walks you through it. This article deals solely with what each action costs and with the places where you can save money.
Which MetaMask fees apply to swaps and bridges?
According to MetaMask's fee page, the standard rate currently stands at 0.875 percent. It applies to swaps within one network, to cross-chain swaps (bridging), to Quick Buy and Quick Sell, to Batch Sell and to limit orders. The swap fee is already built into the quote that MetaMask shows you before you confirm. So you do not see an extra line item after you click; instead you receive slightly fewer tokens for your money from the outset.
Three types of cost are explicitly not included in these 0.875 percent:
- Network fee (gas): The gas goes to the network and its validators, not to MetaMask, and it fluctuates with network load.
- Bridge provider fees: When you bridge, the service that actually moves the tokens from one blockchain to another also takes a cut.
- Price impact and slippage: The price you end up getting depends on the liquidity of the market.
MetaMask also states that programmes and time-limited promotions can lower the rate for certain tokens or networks or waive it entirely; the quote then shows the reduced rate. According to the provider, the fee is never higher than the standard rate. Such discounts are a bonus that you should not rely on when planning. Limit orders have one peculiarity: when you place one, the screen only says "Includes MetaMask fee", and the exact fee is calculated only on execution. According to MetaMask, placing or cancelling a limit order incurs no additional fee. Perpetuals (Perps) and prediction markets (Predictions) have their own fee structures that do not fall under the standard rate.
MetaMask fees for gas on Ethereum: base fee, priority fee and gas limit
Gas is the unit of computation that Ethereum uses to measure the effort a transaction requires. What you pay results from two figures: the number of gas units consumed and the price per unit, quoted in gwei. One gwei is a billionth of an ether. According to ethereum.org's explanation of gas, a simple transfer of ether always uses 21,000 units, while a swap through smart contracts uses many times that amount.
The price per unit is made up of the base fee and the priority fee. The protocol sets the base fee itself for every block, and it is burned, meaning it disappears from circulation. The priority fee is a tip to the validator that includes your transaction in a block. The gas limit is the maximum number of units you authorise for a transaction; if it is not enough, the transaction fails, and the gas consumed up to that point is gone anyway. In MetaMask's advanced gas settings you can set the maximum fee and the priority fee yourself instead of accepting the defaults.
You can find a detailed look at the mechanics in our explainer What are Ethereum gas fees?. For the cost question, one rule of thumb is enough: on Ethereum, gas is a fixed amount per transaction, regardless of whether you swap €50 or €50,000. MetaMask's swap fee, by contrast, grows with the amount.

MetaMask fees on an Ethereum swap: 237,941 gas units at the median
How much gas a swap through MetaMask actually consumes is shown by our own analysis of 19 successful swaps through MetaMask's swap contract on Ethereum on Sunday evening, November 15. The median was 237,941 gas units; the most economical swaps needed around 180,000, while some complex routes across several pools required up to 690,000. Over the same period, the base fee ranged between 0.15 and 0.20 gwei, with a median of 0.18 gwei.
What stood out was the price that MetaMask users actually paid: a median of 2.19 gwei per unit, more than twelve times the base fee. The difference is priority fee. At an ether price of €1,646.81 (as of the evening of November 15), that gives the following calculation for a typical swap of 237,941 units:
| Gas price | Cost in ETH | Cost in euros |
|---|---|---|
| 0.18 gwei (base fee only, median) | 0.0000428 | 0.07 |
| 2.19 gwei (median actually paid) | 0.000521 | 0.86 |
| 20 gwei (worked example for a congested blockchain) | 0.00476 | 7.84 |
The third row is a worked example with no measured value behind it; it shows what the same swap costs when the network is heavily loaded and the gas price climbs to 20 gwei. For you this means that, on a quiet network, gas on Ethereum is currently a small sum, and with a lower priority fee you can save a large part of it again if you accept a wait of a few minutes. A simple ether transfer of 21,000 units cost less than one cent at 0.18 gwei.
Worked example: MetaMask swap fees on €100, €1,000 and €10,000
Because the service fee is a percentage and gas is fixed, the balance shifts with the size of the swap. The following calculation uses the standard rate of 0.875 percent and the median gas actually paid, €0.86, from the analysis above:
| Swap value | MetaMask fee (0.875%) | Gas (median) | Total | Share of swap value |
|---|---|---|---|---|
| €100 | €0.88 | €0.86 | €1.74 | 1.74% |
| €1,000 | €8.75 | €0.86 | €9.61 | 0.96% |
| €10,000 | €87.50 | €0.86 | €88.36 | 0.88% |
With small amounts the gas still carries weight; from about €1,000 upwards, the percentage determines almost the whole bill. If you regularly swap larger sums, then, what you pay for in MetaMask is mainly the convenience of the built-in aggregator, which compares the quotes of several decentralised exchanges. Not included are price impact and slippage, which on large amounts in small pools can quickly cost more than the fee itself.
Software wallets compared: fees and featuresMetaMask fees on Layer 2 instead of Ethereum mainnet: networks with fees in cents
MetaMask connects not only to Ethereum but also to Layer 2 networks such as Arbitrum, Base, Optimism or Linea. A Layer 2 is a separate blockchain that bundles transactions and secures them collectively on Ethereum; this sharply reduces the gas per transaction. On Sunday evening, the gas price on Base was around 0.006 gwei and on Arbitrum 0.02 gwei. For transactions on the scale of a swap, that came to a median of around a quarter of a cent on Base, including the data share for Ethereum, and about one cent on Arbitrum.
The service fee of 0.875 percent applies on a Layer 2 just as it does on Ethereum. Moving to a cheaper network therefore saves gas, not the swap fee. It pays off above all for many small transactions, for example with DeFi applications or when saving into a stablecoin. To do so, you first have to move your coins to the Layer 2, and that is exactly where the next costs arise.

MetaMask bridge fees: the wallet's share, the bridge provider and gas on the source blockchain
A bridge transfers tokens from one blockchain to another. For this, MetaMask aggregates the quotes of several bridge providers and charges the same rate of 0.875 percent on cross-chain swaps. MetaMask works through an example in its help pages: on 1,000 USDT, 8.75 USDT go to MetaMask, and the bridge provider's costs are then deducted from the remaining 991.25 USDT. On top of that comes the gas on the source blockchain, which you pay in that chain's own coin.
In practice this means that if you move from Ethereum to a Layer 2, you pay gas on Ethereum, the service fee and the bridge provider's margin. Before confirming, compare the amount that the quote says will arrive on the destination blockchain with the amount you send off. That difference is the most honest figure for the total cost, because it contains all three items.
Slippage and price impact: MetaMask costs that appear on no fee line
Slippage is the gap between the displayed rate and the rate actually executed, because the market moves between the quote and execution. In MetaMask you set a tolerance; if it is exceeded, the swap fails instead of going through at a worse rate. Price impact is something different: it describes how strongly your own order shifts the price in a liquidity pool. With a large swap in a small pool, this effect alone can cost several percent.
Two simple rules help. First, the quote shows you the minimum number of tokens you will receive; that is the figure you should read, not just the rate. Second, with large amounts it is worth splitting the swap into several smaller swaps if the quote shows a high price impact. Each additional swap, however, costs gas again.
MetaMask fees for buying crypto with euros and cashing out: third-party providers
MetaMask also offers the purchase of cryptocurrencies with euros in the app, for example by card or bank transfer. The purchase is carried out by third-party providers, which apply their own fees and exchange rates; the app shows which providers and payment methods are available in your region. These fees appear in the respective quote and vary by provider and payment method, so comparing several quotes before you buy is worthwhile.
To the frequent question of how to get money from MetaMask back into your bank account, there are two answers: selling through a third-party provider directly in the wallet, or sending the coins to a crypto exchange, where you sell them for euros and have the proceeds paid out. With the second route you pay gas for the transfer plus the exchange's trading and withdrawal fees, but no MetaMask service fee, because you do not swap anything in the wallet.
Compare crypto exchanges and swap for lessMetaMask fees or a crypto exchange: when a software wallet is cheaper
For simply swapping common coins, centralised exchanges are usually cheaper than a wallet's built-in swap, because many platforms charge spot trading fees well below one percent. Which exchanges are licensed in the euro area and what they cost is shown in our comparison of the best crypto exchanges. MetaMask plays to its strengths elsewhere: with tokens that trade only on decentralised exchanges, with direct access to DeFi applications and dApps in Web3, and with self-custody, where no company holds your coins.
The security of a hot wallet such as MetaMask depends on your Secret Recovery Phrase, the twelve words that let you restore the wallet. If you hold larger amounts, you can pair MetaMask with a hardware wallet: the keys then stay offline on the device, and MetaMask serves only as the interface. That changes nothing about the fees; the service fee and the gas remain the same.
MetaMask fees: from €1,000 upwards, the percentage counts, not the gas
- Compare costs: Before larger swaps, check whether a licensed exchange is cheaper; the fees are listed in our exchange comparison.
- Choose a wallet: If you mainly use DeFi, compare MetaMask with other wallets in our software wallet comparison and pay attention to built-in swap fees there.
(As of November 16, 2026. This article is not investment advice. Prices and fee structures change; check the terms with the provider before you buy.)
Frequently asked questions about MetaMask fees
Partner links: some links on this page are partner links. If you become a customer through one of them, we may earn a commission at no extra cost to you. Selection, ratings and ranking are decided independently by our editorial team. Ethics and Independence · Ownership and Funding
Created with AI assistance. Editor: Dennis Weidner. The feature image was generated with AI. How we use AI
For later? Save this article and find it again in your profile.
More on Ethereum: All Ethereum news at a glance
Related articles
- Buterin backs EIP-8037: new Ethereum accounts would cost 7 times more gas
- How to buy Bitcoin Cash: fees on €500 range from €1.25 to €7.45
- NiceHash explained: miners pay a 2 percent fee on the hashrate they sell
- Across Bridge hack: hijacked domain drains around $350,000 from wallets on six blockchains
- Phantom wallet setup: twelve words decide the fate of your Solana coins
Which topics should we dive deeper into?
Select what genuinely interests you. Your picks feed directly into our editorial planning.
Crypto news that's actually worth your time.
Weekly. 60 seconds. Carefully curated by our editors: no hype, no promo flood, no spam.
November 7, 2026 7:38 PM

OKX Fees: Trading, Futures and Withdrawal Fees by Region
OKX charges 0.08 percent maker and 0.10 percent taker on spot and 0.02 or 0.05 percent on futures. All fee tiers, the rates in Europe, the US and Australia, withdrawal, SEPA and card fees, and a comparison with Bitget, Kraken and Coinbase.
November 7, 2026 6:58 PM

Bitget Fees: Spot, Futures and How BGB Lowers Them
Bitget charges 0.1 percent on spot and 0.02 or 0.06 percent on futures. All VIP levels, the BGB discount, funding and withdrawal fees, copy trading costs and a comparison with Bybit and OKX Australia.
November 5, 2026 8:27 AM

How to use Etherscan: reading transactions, gas fees and smart contracts with real examples
Etherscan shows every movement on the Ethereum blockchain, free of charge and without sign-up. This guide uses real examples to explain how to read transactions, fees, tokens and smart contracts, and how to protect yourself from address poisoning.
November 3, 2026 9:25 AM

DefiLlama explained: how to read the DeFi data correctly
What DefiLlama measures and how to read TVL, fees, revenue, stablecoins and yields correctly: a guide with our own data analysis and six common reading mistakes.
November 2, 2026 9:43 PM

How to store crypto safely: protect yourself from hacks like the one at Binance
After the $6.3 billion hack at Binance: how to store your cryptocurrencies safely. Hardware wallets compared, wallet scanners such as MetaMask Security Alerts, the key settings on your exchange account and a seven-step checklist.
November 1, 2026 12:18 AM

Ethereum price prediction: Glamsterdam upgrade delayed, what matters now
Analysis: the developers have halted the Glamsterdam activation on the Hoodi testnet, and there is no new date. A different number matters more for the price: the base fee stands at 0.058 Gwei, and supply is growing again as a result.
October 31, 2026 6:29 PM

Buying Kaspa: three exchanges trade KAS against the euro, with fees between 0.15 and 1.49 percent
Bitvavo, Kraken and Bitpanda list Kaspa with MiCA authorisation. €100 bought around 3,121 KAS at midday on Wednesday, and the fee ranged from 15 cents as a maker to €1.49 for an instant buy.
October 26, 2026 12:00 PM

Bitcoin Wallet Bug: Why Speeding Up a Payment Could Drain Your Wallet
A Bitcoin wallet bug let rogue servers swap a real payment for a fake one and trick users into signing it. How the fee bump trap works and how to stay safe.
October 25, 2026 6:13 PM

Ethereum price prediction: 9.7 ETH burned as supply keeps growing
Analysis: The data shows that Ethereum burned 9.7 ETH in fees over the past 24 hours, while supply grew by 2,956 ETH over the same period. Our assessment follows below: the scarcity mechanism that many ether holders pin their expectations on is, in practical terms, currently switched off.
October 25, 2026 3:31 PM

Electrum wallet vulnerable before version 4.8.3: what you can do now
Electrum released version 4.8.3 on October 23, 2026 and closed a flaw that malicious servers had already exploited. It does not harvest your keys; it targets the moment you speed up a stuck transaction.
October 14, 2026 1:21 AM

BNB zero fees for USDC and USD1 until October 31: what changes for investors in Germany
On the BNB Smart Chain, withdrawals and wallet transfers in USDC, USD1 and U cost no gas until October 31. The 37th auto-burn is also due, and total supply still sits 33.16 million tokens above the target of 100 million.
October 12, 2026 4:16 AM

Binance fees: 0.1 percent to trade, and one drawback compared with MiCA-licensed exchanges
Binance charges 0.1 percent in spot trading and 0.02 and 0.05 percent in derivatives. Since July 1, 2026 the exchange has lacked the MiCA authorisation for the EU, which leaves the fee table answering only half the question German investors are asking.
October 11, 2026 7:17 PM

Ethereum price $2,504 as the base fee drops to a sixth: will the $2,495 level hold?
Ethereum traded at $2,504 on Sunday afternoon, with the daily range down to 0.63 percent. More telling than the chart is the block data: the base fee is 0.0673 gwei, a sixth of the weekly average, and the burn now offsets just 0.49 percent of new issuance.
October 10, 2026 7:40 PM

Decentralised Crypto Exchanges (DEX): Network Fee Against Pool Fee, and Why Custody Decides
On Ethereum a swap through a decentralised exchange currently costs three to five cents in network fees, while the fee for the liquidity pool runs between 0.01 and 1.00 percent depending on the pair. That leaves both routes level on cost, and what comes afterwards decides: custody, supervision and records.
October 10, 2026 7:15 AM

Sparkasse Crypto Fees: 99 Cents per Order, but Your Own Hardware Wallet Is Blocked as a Destination
DekaBank has published the contractual documents for “Krypto – powered by Deka”. That puts a 0.99 euro transaction fee, a 250,000 euro order ceiling and five minimum delivery amounts on the record at source for the first time. Your own hardware wallet remains excluded as a recipient address.
October 6, 2026 4:29 PM

Setting up MetaMask: the twelve words that control your coins
MetaMask is set up in ten minutes, and in those ten minutes you make the decisions that later determine what happens to your balance. This guide walks through installation, the recovery phrase, networks, approvals, fees and the German tax position.
October 2, 2026 4:18 AM

AVAX withdrawals: C-Chain vs X-Chain, and which address yours needs
Avalanche runs three blockchains, and only the C-Chain carries tokens, smart contracts and DeFi. This guide shows how to recognise a C-Chain address, what a transfer costs and how to trace it in Snowtrace.
October 1, 2026 7:15 PM

Bitpanda fees from 0.99 to 2.49 percent: what is behind it
Bitpanda assigns every coin to one of four price tiers, from 0.99 percent for Bitcoin to 2.49 percent for small caps. What 100 euros costs in and out, why the spread is missing from the mandatory document, and where 0.25 percent is enough under the same roof.
September 30, 2026 10:39 AM

The Polygon Network Runs on POL Instead of MATIC: What to Watch in Your Wallet, Fees and Polygonscan
MATIC has become POL, one to one and without any haircut in value. What that means for your holding, how to set Polygon up, what a transfer costs and how to read Polygonscan.
September 29, 2026 10:26 AM

Shiba Inu after the Shibarium switch: the old RPC endpoints are off, what you can do now
Shibarium replaced its public access points in September 2026, and the old RPC endpoints no longer answer. What holders of SHIB and BONE now need to update in their wallet, at the bridge and in their records.
September 28, 2026 1:15 PM

Arbitrum One in Practice: What Matters for Bridge, Gas and the Seven-Day Wait
A transfer on Arbitrum One cost around a tenth of a cent today, while the way back to Ethereum takes at least seven days. This guide shows how to set up the network, read Arbiscan and revoke approvals — and why the Security Council is part of the picture.
September 28, 2026 10:26 AM

Phantom Wallet and Solscan: What a Solana Transfer Really Costs and Where It Fails
A transfer on Solana costs 0.000005 SOL, a new token account ties up 0.00148844 SOL once — both values measured on-chain by us today. This practical guide shows how to set up Phantom, how to get there from the exchange, how to read Solscan and what applies for tax in Germany.
September 28, 2026 7:16 AM

Ethereum Gas at One Cent: What Gwei and Etherscan Mean for Your ERC20 Transfers
An ether transfer cost around one cent on September 27, 2026, while a swap on a decentralised exchange cost eight. This guide explains how gas is billed in gwei, what to look up on Etherscan and which three mistakes are the most common in an ERC20 transfer.
September 20, 2026 7:20 PM

Coinbase Fees: What a Purchase Really Costs, and Where the Spread Is Hidden
The fee Coinbase shows you before a purchase is not the whole price. Alongside it sits the spread, built into the rate, and limit orders add another percent on top. We read the current terms at the source and show the four places where the exchange earns.
More from CryptoTicker

